So wählen Sie eine Spritzgießmaschine richtig aus

2021-07-03

Bevor wir die Spezifikationen und Modelle derSpritzgießmaschine, we must first check the performance parameter values of the Spritzgießmaschine in the product manual provided by the Spritzgießmaschine manufacturer. And these parameter values represent the main performance characteristics of the Spritzgießmaschine, according to some technical requirements of the plastic products to be produced: such as the type and brand of raw materials used in the product, the quality (weight) of the product, and the size of the product.

Go to find the parameter values in the manual that are close to it. The Spritzgießmaschine model corresponding to these parameter values is the Spritzgießmaschine to be purchased. At the same time, it is necessary to know whether the working accuracy, speed and product accuracy level of the Spritzgießmaschinezu kaufenden Formbedingungen des Produkts entsprechen.
In addition, the comparison data in the specifications and models are: the ratio of the quality (or volume) and external dimensions of the injection molded product to the parameter value in the equipment, that is, the ratio between the quality (weight) and the theoretical injection volume (or volume) of the Spritzgießmaschine. The proportional relationship between.
The length (height) of the product and the thickness of the forming mold (thickness of the mold on the movable template) are required to be between the sum of the dimensions and the stroke distance of the movable template of the Spritzgießmaschine. In addition, it should be verified that the structural dimensions of the mold to be installed on the Spritzgießmaschine are consistent with the conditions of the Spritzgießmaschine:

1. Der Abstand zwischen den Zugankern sollte größer als die Breite und Höhe der Form sein, um den Zusammenbau der Form zu erleichtern.

2. Die Größe der Schablone entspricht den Größenanforderungen des Formwerkzeugs, wenn es installiert und befestigt ist.

3. Die Breite und Höhe der Form muss der kleineren Formgröße entsprechen, die von der . empfohlen wirdSpritzgießmaschine.
  • QR