Merkmale und Funktionen verschiedener Arten von Spritzgießmaschinen.

2021-07-09

AproposSpritzgussmaschinen, vermutlich sollten sich die meisten Menschen nicht sehr fremd fühlen. Die sogenannte Spritzgussmaschine kann tatsächlich auch als Spritzgussmaschine bezeichnet werden. Es ist die Hauptformausrüstung, die Kunststoffformwerkzeuge verwendet, um Kunststoffprodukte in verschiedenen Formen herzustellen. Es kann nach dem Plastifizierungsverfahren, dem Übertragungsverfahren der Maschine und dem Betriebsverfahren in viele verschiedene Kategorien eingeteilt werden. Um den Benutzern zu helfen, den Wert vonSpritzgussmaschinen, Tongjia Heavy Industries, a professional manufacturer of Spritzgussmaschinen, will introduce the characteristics and scope of application of different types of Spritzgussmaschinen in detail.
Der erste Typ: horizontale Spritzgießmaschine
This is a relatively common type of Spritzgießmaschine. The clamping part and the injection part are on the same horizontal center line, and the mold is opened in the horizontal direction. Its characteristics are: the body is short, easy to operate and maintain; the machine has a low center of gravity, and the installation is relatively stable; after the product is ejected, it can automatically fall by gravity, and it is easy to realize fully automatic operation. At present, most of the Spritzgussmaschinen on the market adopt this type.


Der zweite Typ: vertikalSpritzgießmaschine

In this type of Spritzgießmaschine, the clamping part and the injection part are on the same vertical centerline, and the mold is opened in the vertical direction. Therefore, it occupies a small area, it is easy to place inserts, it is convenient to load and unload molds, and the materials falling from the hopper can be plasticized more uniformly. However, the product is not easy to automatically fall after being ejected, and must be removed by hand, which is not easy to realize automatic operation. Vertical Spritzgussmaschinen are suitable for small Spritzgussmaschinen. Generally, Spritzgussmaschinen below 60 grams are more commonly used, and large and medium-sized machines are not suitable.


The third type: Angle Spritzgießmaschine

The injection direction of the angle Spritzgießmaschine is on the same surface as the mold interface. It is particularly suitable for processing flat products where gate marks are not allowed in the machining center. It occupies a smaller area than a horizontal Spritzgießmaschine, but the inserts placed in the mold are easy to tilt and fall. This type of Spritzgießmaschine is suitable for small machines.


The fourth type: multi-mode turntable Spritzgießmaschine

Es ist etwas BesonderesSpritzgießmaschine with multi-station operation. Its characteristic is that the mold clamping device adopts a turntable structure, and the mold rotates around the shaft. This type of Spritzgießmaschine gives full play to the plasticizing capacity of the injection device, which can shorten the production cycle and increase the production capacity of the machine.

  • QR